Argon System with 6 cuft Cylinder and Fill Block

Argon Inflation System with 6 cuft 3000 PSI Cylinder and Fill Station Filling Adapter

TDL Dry Suit Inflation System is a complete unit consisting of:

 

●          Integrated Regulator-Valve

●          6 cubic foot  Aluminum Cylinder

●          22" Hose with Easy Grip "Hose-Hat"

●          Over pressure Relief Valve (OPV)

●          Fill Adapter (fill station style)

●          Argon Label (not installed)

TDL Dry Suit Inflation System is a self-contained integrated valve and first stage assembly Measuring only 2 3/8 inches tall this is the most compact valve/regulator system in existence. The regulator is a balanced piston first stage with an intermediate pressure set at the factory at 120 psi. Each regulator has 2 LP hose ports and one HP hose port for a gauge, a safety assembly (burst disk) and a special one way fill valve is built into the regulator to allow for easy filling with the fill adapter.

The TDL Dry Suit Inflation System is an active regulator valve system that it is always "on". No knobs to turn, no valves to check before diving. As long as the suit hose is connected and the cylinder is full, it works.

Use the unit with Argon for added thermal protection or just air. Either way it works great!

No additional Discounts Apply